€ 49,14
Brez DDV: € 40,61
Opis artikla
The BUTTON by Fibaro is valable as of now!
By this button FIBARO presents the newest addition the intelligent home.
THE BUTTON is the first wireless device with such a unique, yet simplistic design with incredible power and functionality. With THE BUTTON, a simple click can control the entire home. This compact, battery-powered and Z-Wave Plus compatible device allows you to control devices through the Z-Wave network and run various defined scenes.
Different actions may be triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene.
With its small design and wireless communication, the FIBARO BUTTON can be conveniently mounted on any surface and in any position or location at home, e.g. beside the bed or under the desk.
- Compatible with any Z-Wave or Z-Wave+ Controller
- Supports protected mode (Z-Wave network security mode) with AES-128 encryption
- Completely wireless with battery power and Z-Wave communication
- May be installed anywhere in your home
- Extremely easy installation - simply add and put on desired surface
- Many colour variations: white, black, red, yellow, green, blue, brown and orange
Karakteristike
| Glavni krmilnik Združljivost | |
|---|---|
| eeDomus+ | Full Compatible |
| Fibaro Home Center 2 v4.160 | Full Compatible |
| Fibaro Home Center Lite v.4.160 | Full Compatible |
| Zipabox/Zipaminicro/ZipaTile | not texted |
| Piper / Piper NV (v.1.7.1) | not texted |
| Indigo | not texted |
| jeedom | Full Compatible |
| ZiHome | not texted |
| Tech Data | |
| Power Supply | Batery ER14250 (1/2AA) 3,6V |
| SDK | 6.51.09 |
| App Version | 3.02 |
| Device Type | Wall Controller |
| Z-Wave Alliance Product Link | Wall Controller |
| Procedures | |
| Inclusion | 1) Place the Button within the direct range of your Z-Wave controller. 2) Set the main controller in (security/non-security) add mode (see the controller’s manual). 3) Click the Button at least six times. 4) Wait for the adding process to end. 5) Successful adding will be confirmed by the Z-Wave controller’s message. |
| Exclusion | 1) Place the Button within the direct range of your Z-Wave controller. 2) Set the main controller in remove mode (see the controller’s manual). 3) Click the Button at least six times. 4) Wait for the removing process to end. 5) Successful removing will be confirmed by the Z-Wave controller’s message. |
| Factory Reset | Reset procedure allows to restore the device back to its factory settings, which means all information about the Z-Wave controller and user configuration will be deleted. In order to reset the device: 1) Click the Button exactly five times. 2) Press and hold the Button for at least 5 seconds. Please use this procedure only when the network primary controller is missing or otherwise inoperable |
| Wake Up | The Button needs to be woken up to receive information about the new configuration from the controller, like parameters and associations. 1) Click the Button 4 times to wake it up |
