€ 129,00
Brez DDV: € 106,61
Opis artikla
Manage a KNX installation from your Zipabox !
The extension module KNX for Zipabox is a simple solution for integrating the KNX protocol. The device supports BAOS protocol for accessing the data points. This allows KNX devices to be fully integrated into a network Zipato via KNX bus. Adding support to the KNX network ZipaBox , the user can connect any compatible devices KNX and combine with all existing devices in the network , regardless of protocol. The KNX module is mainly used by experienced users to add more choices in devices and increase the number of devices that can be controlled by Zipabox . The KNX module plugs on the extension of the Zipabox (Slot 2 , or the extension connected to Slot 2 Module ) connector.
FEATURES :
- Expansion module for Zipabox
- Adds support KNX protocol
- Can control up to 250 devices KNX
SPECIFICATIONS :
- Electrical Safety
- Protection class ( EN 60529) : IP 20
- Voltage safety extra low voltage SELV DC 30 V
- Galvanic isolation : 2.5kV DC
- EMC requirements Conforms to EN 50090-2-2 and EN 50491-5-2 CE
- Complies with EMC ( residential and functional buildings) and the Low Voltage Directive
- Environmental conditions
- Ambient operating temperature : - 5 ... + 45 ° C
- Storage temperature : - 25 . ... + 70 ° C
- Relative humidity (non-condensing ): 5% ... 93 %
- Mechanical characteristics
- Case: plastic device mounted on a DIN rail , Width: 18 mm
- Weight: 45 g
- LED indicator (green ) to connect KNX
- Power electrical Characteristics
- Powered by a KNX bus.
- Current consumption : approx. 10 mA
- Connectors KNX :
- KNX connector Zipabox : connector for Slot 2 on the Zipabox
- Protocol UART (19.2 kbit / s , 8 data bits , no parity , 1 stop bit)
- Frame size : FT1.2 (IEC 870-5-1 and 870-5-2 )
- Protocol telegrams EMI2
- Protocol data points : BAOS Binary V1
- Up to 250 objects and 250 group settings
