Detektor dima Fibaro certified CE EN 14604 Z-Wave Plus

The finest and most functional in the world smoke detector!

With smooth lines of a polished surface and a small size, this smoke alarm will alert a threat with multicolored RGB LEDs and a built siren. The large size of the network can detect the least amount of smoke to get a quick answer. Therefore, easily find its place in your home to preserve the security of the whole family. The smoke detector Fibaro FGSD-002 is an alarm Standalone Smoke Detector (DAAF) according to EN 14604: 2005. Although autonomously, also communicating with the Z-Wave Plus technology. Some materials burn without smoke. That's why Fibaro engineers decided to include additional protection in your smoke detector and a temperature sensor. If the amount of smoke is not sufficient to activate the alarm, the device will still be able to detect a threat by detecting a rapid change in temperature caused by fire. A rapid change in temperature or increased to 54 ° C is sufficient for the smoke sensor detects a threat and warn the inhabitants of the house. Only this type of smoke sensor provides high efficiency, whatever is burning.

The sensitivity of the sensor can be adjusted according to the place where it is installed. In the kitchen, a very sensitive sensor may activate the alarm even when frying meat, so it should be less sensitive, helping to prevent irritating false alarms. In other rooms, where it is less likely the presence of smoke in normal conditions, the sensor must be set to the maximum sensitivity to provide the best protection. An integrated smoke detector "black box" records information about smoke levels and temperature. The alarm system is armed or not, the sensor monitors the level of smoke and sends the information to the host controller periodically. Now you can detect the slightest amount of smoke from a cigarette. For your safety, and to ensure that the smoke alarm is working properly, it has been equipped with a tester range of Z-Wave network. Network communication wireless mesh Z-Wave lets you stay connected to the controller over long distances and through indirect connectivity with other Z-Wave modules. The integrated LED allows you to easily check if the sensor has a good range and can communicate with Fibaro system or requires a different location. Z-Wave (remote control, dongle ...) to integrate this module in your network if you already have an existing network controller required.

FEATURES:

•  Smoke detector Z-Wave
•  Battery powered
•  Adjustable sensitivity sensor (3 levels)
•  Protection against sabotage
• Alarm sound indicated by an LED light and a signal Z-Wave
•  Fire detection by measuring the air temperature
•  Automatic test leads effectively gives out every 5 seconds
•  "Black Box" Integrated - the sensor reports and records temperature data and smoke
•  Coverage Tester integrated Z-Wave network
•  Complies with EN 14604: 2005
•  Compatible Z-Wave Plus
•  Wireless Update with case Fibaro Home Center 2
•  Simple installation - only needs to be installed in a place where there is risk of fire

SPECIFICATIONS:

•  Module Type: Z-Wave Transmitter
•  Power: 3V CR123A lithium battery
•  Battery life: 3 years • Frequency: 868.42 MHz
•  Transmission distance: 50m free field, 30 meters indoors
•  Dimensions: 65 x (diameter x height) 28 mm
•  Operating temperature: 0-55 ° C
•  Operating Humidity: 0% - 93%
•  Temperature measurement range: -20 to 100 ° C
•  Sensitivity Smoke: 1st level - 1.20 +/- 0.5% obs / m; Second level - 1.80 +/- 0.5% obs / m; 3rd level - 2.80 +/- 0.5% obs / m
•  Noise level: 85 dB at 3 m
•  Measurement accuracy: 0.5 ° C (range of 0-55 ° C)
•  Standards: EMC 2004/108 / EC and R & TTE 199/5 / US
•  Certifications: EN 14604: 2005

Napišite mnenje

V spodnje polje prepišite varnostno kodo s slike: