Multisensor 6 in 1 Z-Wave Plus Aeon Labs


Brez DDV: € 57,81

Na zalogi

Opis artikla

The 6 in 1 multisensor by Aeon Labs 6 is a small device Z-Wave Plus filled with intelligence. A smart home must offer more than just automation; it must react to what happens in a real-time home. The multisensor 6 is the basis of modern intelligent home; in this perfect little box is the technology for real-time intelligence.

Aeotec MultiSensor 6 - Motion Motion sensor

Motion for security. Motion for presence. Motion for management. MultiSensor 6’s motion sensor is perfect for more than just an intelligent security system. With a 5 metre range and a 120° field of view, MultiSensor 6 captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data – MultiSensor 6 makes your home automation system more powerful and more intelligent.

MultiSensor 6 - Motion

Aeotec MultiSensor 6 - Temperature Temperature sensor

From motorised curtains and windows to fans and thermostats, there are a lot of ways that you can use Z-Wave to keep the temperature of a room absolutely perfect. MultiSensor 6 provides the intelligence to do just that. Within each sensor is an incremental temperature sensor capable of accurately measuring between -10~50°C (14 to 122°F) and reporting temperature changes back to a smart home gateway.

Aeotec MultiSensor 6 - Light Light sensor

 Automated lighting is only as smart as the system that powers it. With MultiSensor 6’s real-time, digital light sensor measuring the level of light in a room, your home control system will be able to intelligently maintain its ambiance. From opening and closing curtains, to setting lights to be the perfect level be it day or night, MultiSensor 6 is the smarts behind smart lighting.

MultiSensor 6 - Light

Aeotec MultiSensor 6 - HumidityHumidity sensor

Spaces such as bathrooms and kitchens can be too humid, while some environments are often not humid enough. MultiSensor 6 offers incremental monitoring of a humidity ranging from 0% to 100%, allowing for the intelligent automation of fans, motorised windows, dehumidifiers and humidifiers. MultiSensor 6 monitors your home on such an infinitesimal level so that your home management system can make your environment truly perfect.

Aeotec MultiSensor 6 - VibrationVibration sensor

 It measures the environement it’s in, and it also measures itself. MultiSensor 6 contains a seismic sensor capable of detecting and reporting event-based vibrations. Those slight changes can be used to protect MultiSensor 6 – it’ll know if an intruder is tampering with it or if the sensor has accidentally moved from its place of installation. They’ll also be able to record subtle seismic activity within your home.

Aeotec MultiSensor 6 - UV UV sensor

 Perfectly managing an environment means understanding it perfectly. MultiSensor 6 accurately measures ultraviolet light; the kind of light that causes everything from furniture bleaching to eye damage. Measured inline with the World Health Organisation’s UV Index, MultiSensor 6 measures a room’s UV level so that an environment can be managed through curtains, shades and lighting, and so that health and property recommendations can be made.

MultiSensor 6 - UV

 MultiSensor 6 - Power Perfect power

Perfect battery life isn’t perfect for every installation. For all those times, MultiSensor 6 can be run on mains power. Simply connect it to your home’s electricity using the provided USB cable and MultiSensor 6 will be able to run in an advanced mode, providing temperature, humidity and light readings in real-time.

MultiSensor - Engineering


  • Detector 6 in 1: movement, temperature, humidity, light, UV, vibration
  • Sending the signal up to 6 Z-Wave modules
  • Small, discreet and aesthetic
  • IP20 - Indoor Use / Outdoor*
  • Wireless Update firmware possible
  • Optimized antenna scope
  • Power Battery or USB adapter 5VDC
  • Supports the latest control commands of Z-Wave protocol
  • Part of Aeon Labs Gen 5 series
  • Safety radio communication via the AES-128 encryption
  • Integrates Z-Wave chip 500 series
  • Communication 250% faster compared to standard Z-Wave devices
  • Optimization of the antenna, range 100 meters
  • Button to include / exclude the detector
  • Low Battery Detection
  • Ease of use and installation


  • Module type: Z-Wave Transmitter
  • Power: 2 x CR123A 3V 1500mAh batteries (not included) or USB adapter 5VDC
  • Battery Life: 2 years
  • Frequency: 868.42 MHz
  • Transmission distance: 150m outdoors
  • Temperature sensor :
    • Measuring range: -10 ° C to 50 ° C
    • Accuracy: ± 0.5 ° C
  • Humidity sensor:
    • Measuring range: 20% to 80%
    • Accuracy: ± 5%
  • Light sensor: 0-1000 LUX
  • Motion detection sensitivity: 3 to 5m
  • Dimensions: 42 x 42 mm (d x h)
  • Weight: 74g
  • Led display
  • IP Protection: IP20




Glavni krmilnik Združljivost
eeDomus+ Full Compatible
Fibaro Home Center 2 v4.160 Not Tested
Fibaro Home Center Lite v.4.160 Not Tested
Vera Edge / Plus / Secure Not Tested
Zipabox/Zipaminicro/ZipaTile Full Compatible
Indigo Not Tested
jeedom Full Compatible
Domoticz Full Compatible
ZiHome Not Tested
Tech Data
IP Rating IP20
Power Supply 2 x CR123A or via USB cable
Explorer Frames - NWI Support No
App Version
Device Type Z-Wave emitter
Peper1 Database link
Z-Wave Alliance Product Link
Generic Device Class Multilevel Sensor
Specific Device Class Routing Multilevel Sensor
Inclusion Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Z-Wave button that you can find in the back of the product.
Exclusion Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Z-Wave button that you can find in back of the product.
Factory Reset Press and hold the Z-Wave button that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable.
Wake Up Pressing the Z-Wave button once will trigger sending the Wake up notification command. If press and hold the Z-Wave button for 3 seconds, the MultiSensor will wake up for 10 minutes.

Ocene - mnenja (3)

Napišite mnenje

Opomba: Uporaba HTML kode ni dovoljena!

Slabo            Dobro


Z-Wave Slovenija

Spletna trgovina za dom, trženje proizvodov za avtomatizacijo Z-Wave radio. Z-Wave je mednarodni standard za brezžično povezovanje sistemov notranjih kontrol. Lahko upravljate razsvetljavo, elektriko, rolete, alarmi, itd ... Z-Wave izdelki različnih ponudnikov delujejo dobro skupaj omogoča nadzor pametne hiše.

Contact Us