€ 11,99
Brez DDV: € 9,91
Opis artikla
Optimal protection for critical loads. To limit starting currents on problematic devices, such as energy saving bulbs and fluorescent bulbs. Problematic devices, such as electronic ballasts, energy-saving light bulbs, incandescent bulbs, LED drivers, and switching power supplies, consume a lot of power during ignition due to the multiplication of current. nominal and can therefore destroy the switching relay.
With the ESB200 current limiter, the high current that can occur when switching on electronic devices is limited to a harmless value. It is also possible to limit the inrush current of incandescent lamps to give them a longer life. A protection fuse is also integrated. This starting current limiter can be plugged directly into the power supply circuit for loads up to 200 VA. This compact device can be installed very easily in junction and recessed boxes or in lamp boxes, for example. The device is easily installed in series with the load.
Note: The maximum power of 200 W must not be exceeded!
FUNCTIONS:
- Starting current limiter
- Installation in series with the load
- Integrated fuse
- Compact dimensions
TECHNICAL CHARACTERISTICS :
- Power supply: 230V / 50Hz
- Peak inrush current: 90A / 1mS
- Ambient temperature: 5 - 35 degrees
- Load: max. 200VA
- Connection: two flexible connection cables with approx. 100 mm long
- Dimensions (L x W x H): 28 x 23 x 10 mm
- Weight: 10g
