CO Sensor Fibaro Z-Wave Plus


Brez DDV: € 82,64

Na zalogi

Not yet rated
Napišite mnenje

Opis artikla

The Fibaro CO Sensor is an ultra-light, compact and battery-powered Z-Wave Plus carbon monoxide detector designed to be placed on a wall. Its high sensitivity makes it ideal for detecting the presence of carbon monoxide (CO) gas instantaneously in order to avoid carbon monoxide poisoning. The alarm is signaled with an integrated siren, an LED indicator and notifications on the phone. In addition, the appliance is equipped with a temperature sensor.


Instant notifications:

The system allows you to instantly know the highest levels of carbon monoxide by sending important information directly to your smartphone

Autonomous function:

Fibaro's carbon monoxide sensor can function as an independent device. Although it doesn`t provide the features available in the system, there is a specific and effective carbon monoxide sensor. It is important to know that the Fibaro CO sensor is capable of operating autonomously without the Z-Wave controller, although we will not have the advantages offered by this technology. The detector will emit a sound and the light will blink if it detects CO levels.

  • Healthy and safe environment (green light): Carbon monoxide was not detected or its concentration is very low.
  • Moderate environment (orange light): The concentration of CO can affect its condition, be sure to ventilate the room, check the ventilation and find the source that causes that concentration of CO.
  • CO Alarm (red light): The CO level is high enough to be a threat to life. We must adopt the security measures in these cases because our life is in danger.


Carbon monoxide (CO) is the result of poor combustion and can be released by boilers, chimneys or ovens, being mortal to humans.


The Fibaro CO sensor has the BSI Kitemark certificate with the license, recognized throughout the world as a sign of quality and safety. Simplicity saves life simple and easy to understand notifications will allow you to easily assess a threat.


  • Z-Wave Plus Carbon Monoxide Detector
  • Powered by Lithium battery 3V CR123
  • Can be used as a standalone carbon monoxide detector
  • Compatible with Z-Wave or Z-Wave Plus controller
  • Supports secure mode (secure Z-Wave inclusion) with AES-128 encryption
  • Built-in temperature sensor
  • Protection against sabotage
  • Alarm signaled by sound, LED light and Z-Wave message
  • Test coverage of the integrated Z-Wave network
  • Compliant with EN 60950-1
  • Z-Wave Plus Compatible
  • Wireless upgrade via Fibaro Home Center 2
  • Easy installation - just install in a place where there is a risk of CO


  • Module Type: Z-Wave Transmitter
  • Power: Lithium 3V CR123A
  • Battery life: 3 years
  • Life under typical conditions: 8 years
  • Measurement range of CO concentration: 0-450 ppm
  • Measurement accuracy: ± 10 ppm / ± 5%
  • Radio Frequency: 868.42 MHz
  • Transmission distance: free field 50m, 40m indoor
  • Dimensions: 65 x 28 mm (diameter x height)
  • Operating temperature: 0-50 ° C
  • Operating Humidity: 0% - 93%
  • Temperature measuring range: 0 to 60 ° C
  • Alarm response time (default): 60-90min 50 ppm; 100 ppm 10-40min; 300 ppm <1.5 min
  • Noise level: 85 dB at 3 meters
  • Standards: R & TTE 1999/5 / CE; RoHS 2011/65 / EU; EN 60950-1


Glavni krmilnik Združljivost
eeDomus+ Full Compatible
Fibaro Home Center 2 v4.160 Full Compatible
Fibaro Home Center Lite v.4.160 Full Compatible
Vera Edge / Plus / Secure Not Tested
Zipabox/Zipaminicro/ZipaTile Not Tested
Piper / Piper NV (v.1.7.1) Not Tested
Indigo Not Tested
jeedom Full Compatible / Z-Way / PoPP Hub Not Tested
Domoticz Not Tested
ZiHome Not Tested
Tech Data
Power Supply Batery Lithium 3V CR123A
Explorer Frames - NWI Support No
SDK 6.51.09
App Version 3.02:03.0
Device Type Notification Sensor
Z-Wave Alliance Product Link
Inclusion 1) Place the device within direct range of the Z-Wave controller. 2) Set the main Z-Wave controller in (security/non-security) adding mode (see the controller’s manual). 3) Quickly, triple click the button located on the casing. 4) Wait for the device to be added into the system. 5) Successful adding will be confirmed by the Z-Wave controller’s message.
Exclusion 1) Place the device within direct range of the Z-Wave controller. 2) Set the main Z-Wave controller in remove mode (see the controller’s manual). 3) Quickly, triple click the button located on the casing. 4) Wait for the removing process to end. 5) Successful removing will be confirmed by the Z-Wave controller’s message.
Factory Reset 1) Press and hold the button. 2) Release the button when LED indicator glows white. 3) Click the button when LED indicator glows yellow. 4) After few seconds the device will be reset (confirmed by red LED indicator).
Wake Up The CO Sensor needs to be woken up to receive information about the new configuration from the Z-Wave controller, like parameters and associations. To wake up the sensor manually click the button located on the casing.

Ocene - mnenja (0)

Napišite mnenje

Opomba: Uporaba HTML kode ni dovoljena!

Slabo            Dobro


Z-Wave Slovenija

Spletna trgovina za dom, trženje proizvodov za avtomatizacijo Z-Wave radio. Z-Wave je mednarodni standard za brezžično povezovanje sistemov notranjih kontrol. Lahko upravljate razsvetljavo, elektriko, rolete, alarmi, itd ... Z-Wave izdelki različnih ponudnikov delujejo dobro skupaj omogoča nadzor pametne hiše.

Contact Us