€ 45,99
Brez DDV: € 38,01
Opis artikla
The TZ55S switch can be used to vary the lighting connected to it, either manually as a conventional switch or remotely via the Z-Wave + wireless protocol.
It can be included in the Z-Wave network to be controlled by a Z-Wave controller or remote control. The switch is equipped with an LED indicator to easily locate it in a dark room.
The TZ55S switch supports the association commands (Group 1). It is thus possible to associate up to 5 other devices to control them manually from the switch.
Each Z-Wave module functions as a wireless repeater with other modules, to ensure total coverage of your home.
Caution, this switch requires neutral to operate. A recessed box with a depth of 50mm and a diameter of 67mm is recommended for installation (SCHALB71322).
FUNCTIONS:
Order a lamp from a distance
Installs in place of an existing switch
Function Variation
Supports association commands (Group 1)
Local Load Control
Status LEDs
Karakteristike
Glavni krmilnik Združljivost | |
---|---|
eeDomus+ | full compatible |
Fibaro Home Center 2 v4.160 | Not tested |
Fibaro Home Center Lite v.4.160 | Not tested |
Vera Edge / Plus / Secure | not tested |
Zipabox/Zipaminicro/ZipaTile | no tested |
Piper / Piper NV (v.1.7.1) | Not tested |
Indigo | no tested |
jeedom | Compatible |
Domoticz | not tested |
ZiHome | no tested |
Vera 3 | Not tested |
Vera Lite | Not tested |
Tech Data | |
IP Rating | IP 20 |
FLiRS | No |
Power Supply | 230V |
Attachable Loads | 300W |
Explorer Frames - NWI Support | No |
SDK | |
App Version | |
Device Type | Slave with routing capabilities |
Z-Wave Alliance Product Link | |
Generic Device Class | Multilevel Switch |
Specific Device Class | Multilevel Power Switch |
Routing | Yes |