Smart Double Switch L Version - Widom

The Widom Universal Dual Switch Micromodule is a device designed to independently control two separate loads, for use as both a local and remote switch. It can be fully integrated into pre-existing systems and configured to offer different behaviors based on a number of clicks, fully interacting with the Z-Wave home automation ecosystem. Widom's dual dual switch micromodule also has the lowest power consumption on the market. Energy monitoring Each of its two outputs includes a device for measuring consumption. Timer Management Each output has an independent timer, both to turn on and off. Wireless software update You can update the firmware of the device "Over the Air" without having to remove it from its location. Extremely low energy consumption Like other Widom products, the dual switch universal micromodule has the lowest power usage of any similar device on the market. Smart multi-channel association It has two independently adjustable independent channels. It can independently control other devices, whether single-channel or multi-channel. For example, you can remotely control the opening / closing of shutters, control dimmable lights, enable / disable remote loads. Not all Z-Wave devices support associations and / or multi-channel associations. When associations are supported, in general they are a simple local control reference (if I disable local light, I also disable associated ones). With the Widom Universal Dual Switch Micromodule, you can set the state of the local load and the state of the associated devices independently of the load, and you can control them separately by activating the click recognition sequence. So, you can control local loads with one click, and the devices associated with a double clic

FUNCTIONS: 

• Manage two lights / devices remotely 
• Installs behind an existing switch
• ON / OFF function 
• Z-Wave 500 series
• Power consumption measurement
• Integrated timer
• Smart multi-channel association
• Low energy consumption 
• Software update 

  TECHNICAL CHARACTERISTICS :   

• Power supply: 230 VAC ± 10% 50/60 Hz
• Maximum load of the relay: 8A for each channel, 10A for the 2 channels (resistive load) 
• Consumption: <260 mW in standby mode <480 mW with a load in operation <700mW with both loads in operation
• Radio frequency: 868.4MHz
• Radio range: Up to 100m outdoors, 40m indoors
• Operating temperature: -10 to 40 ° C
• Dimensions: 37 x 37 x 17mm 
• IP protection: IP20 
• Certifications: CE, RoHS

p>

Napišite mnenje

V spodnje polje prepišite varnostno kodo s slike: