€ 64,99
Brez DDV: € 53,71
Opis artikla
The FIBARO Simart Module has been designed to activate and deactivate electrical devices. Thanks to its small size, it can be installed in junction boxes or flush-mounted boxes. The module is controlled either by the Z-Wave network or a simple switch. Connect your FIBARO Smart Module to your Z-Wave system and other devices to take advantage of almost endless possibilities!
This module has two potential-free (dry contact) relays with a timer function (used to create a pulse), so it can be used to change a conventional 230V voltage or any type of DC power source ( 5V, 12V .24 V DC). Therefore, it can be used to control any type of load, such as a boiler (connecting the dry contact instead of a thermostat) or a motorized door, garage door .
The integrated RGB diode is a great help during the installation process. The light will show if the FIBARO Smart Module has been added or removed from the network. You can also see if a calibration or update was successful.
FUNCTIONS:
- Controls two lights / devices remotely Installs behind an existing switch (bistable or monostable)
- ON / OFF function
- Two potential free relays (door control, boiler, garage door, etc.)
- Integrates the Z-Wave 500 series chip 250% faster
- Communication compared to standard Z-Wave
- Devices Integrated scene trigger mechanism (via S2)
- Security communication and notification classes
- Diode configuration menu
- Supports secure mode (Z-Wave Network Security) encrypted with AES-128 encryption
- Integrated Z-Wave Network Coverage Tester
- OTA software update (depends on controller)
- Larger terminal blocks for easier wiring.
- Rounded shape to meet the highest standards.
- Small, discreet and aesthetic.
- Ease of use and installation.
TECHNICAL CHARACTERISTICS :
- Module type: Z-Wave receiver
- Power supply: 100 - 240V ~, 50 / 60Hz or 24 - 30 Vdc
- Wiring: 3 wires, neutral required (230V)
- Maximum power:
- Maximum current per output: 6A / 110 - 240V ~, 50 / 60Hz (differs depending on the type of load)
- Total maximum current: 9.5A / 110 - 240V ~, 50 / 60Hz (differs depending on the type of load)
- Frequency: 868.42 Mhz
- Transmission distance: 50m free field, 40m indoors (depends on building structure)
- Signal strength: 1mW
- Dimensions: 42.5mm x 38.25mm x 20.3mm (L x W x H)
- Operating temperature: 0-35 ° C
- Standards: CE, ROHS, 2011/65 / EU, 2014/53 / EU, 2015/863, ZWAVE PLUS
Karakteristike
Glavni krmilnik Združljivost | |
---|---|
eeDomus+ | |
Fibaro Home Center 2 v4.160 | |
Fibaro Home Center Lite v.4.160 | |
Vera Edge / Plus / Secure | |
Zipabox/Zipaminicro/ZipaTile | |
Piper / Piper NV (v.1.7.1) | |
Indigo | |
jeedom | |
Z-Wave.me / Z-Way / PoPP Hub v 3.2.1 | |
Domoticz | |
OpenHAB | |
ZiHome | |
Somfy Tahoma | |
Home Assistant | |
Telldus | |
Tech Data | |
IP Rating | |
FLiRS | |
Power Supply | |
Attachable Loads | |
Explorer Frames - NWI Support | |
SDK | |
App Version | |
Device Type | |
Z-Wave Alliance Product Link | |
S2 Security Frame | |
Procedures | |
Inclusion | |
Exclusion | |
Factory Reset | |
Wake Up |