€ 249,99
Brez DDV: € 206,60
Opis artikla
Danalock offers a smart way to control and manage access to your home safely and conveniently. Simply lock and unlock the door with your smartphone and you no longer have to worry about losing your keys.
Danalock pulls the door latch by opening the door and holding it for several seconds. A timer can be set to lock automatically after each opening (automatic lock). Users can open and close the door with a physical key from the outside and manually by turning the handle inwards. Automatic real-time notifications keep you informed about who has entered or left the house. Danalock can be automated with other devices creating scenes and rules to make the smart home more efficient and comfortable. The installation of the Danalock V3 is possible inside almost any door with a European profile cylinder and only takes a few minutes. The Danalock mounting plate is bolted to the cylinder (sold separately), the Danalock V3 is placed on top and fixed with a click. It can be adjusted and configured using different click commands. The Danalock does not require any external power supply, it is powered by batteries that last approximately one year.
Note: Lock sold without cylinder. Requires a specific cylinder (DANA_275753).
Functions:
- Bluetooth and Z-Wave connection
- Integration into Z-Wave compatible drivers
- Activity History
- Different adjustment possibilities for closing and opening
- Automatic calibration
- Easy to install
- Battery operation
- Compatible with all doors with one Euro profile cylinder
Compatible with iOS (iPhone 4s or later), but also with Android (from 4.4).
Technical Characteristics:
- Power supply: 4 x CR123A 3V batteries
- Autonomy: from 6 to 12 months depending on use
- Material: anodized aluminium and ABS
- Communication: Bluetooth Low Energy
- Pair: 1.5 Nm
- Dimensions: 60 mm x 65 mm (diameter x height)
- Weight: 200g
Danalock v3 manual installation.
Karakteristike
Glavni krmilnik Združljivost | |
---|---|
eeDomus+ | Full Compatible |
Fibaro Home Center 2 v4.160 | Full Compatible |
Fibaro Home Center Lite v.4.160 | Full Compatible |
Vera Edge / Plus / Secure | Full Compatible |
Zipabox/Zipaminicro/ZipaTile | Not Tested |
Piper / Piper NV (v.1.7.1) | Not Tested |
Indigo | Not Tested |
jeedom | Full Compatible |
Z-Wave.me / Z-Way / PoPP Hub v 3.2.1 | Not Tested |
Domoticz | Not Tested |
ZiHome | Not Tested |
Somfy Tahoma | Not Tested |
Home Assistant | Not Tested |
Telldus | Not Tested |
Tech Data | |
IP Rating | IP20 |
FLiRS | YES |
Power Supply | 4 x Batteries CR123A 3V |
Explorer Frames - NWI Support | YES |
SDK | 6.71.01 |
App Version | HW: 2 FW: 1.02:00.07 |
Device Type | Door Lock Keypad / Listening Sleeping Slave |
Z-Wave Alliance Product Link | https://products.z-wavealliance.org/products/2556 |
Procedures | |
Inclusion | 1. Set the controller in inclusion mode 2. Push the switch once. 3. Wait 5 seconds. |
Exclusion | 1. Set the controller in exclusion mode 2. Push the switch once. 3. Wait 5 seconds. |
Factory Reset | The Danalock can be set to factory settings by pushing the switch ten times. Please use this procedure only when the primary controller is missing or otherwise inoperable. |